*** Notice: For the protection of property rights, this catalog is available for online browsing only. Please drop us a line if you would like to receive a copiable version of this catalog. Thank You!


Content

Mechanical Engineering


Piping



TOOLS OF THE TRADE: INSIDE THE PLUMBER'S TOOLBOX

From plungers, to pipe wrenches, to Teflon tape, this program introduces each common tool of the plumbing trade with a brief demonstration of its proper use. Safety precautions and industry tips are provided as well, and four major types of piping and tubing - steel, copper, plastic, and cast iron - are described.

DVD / 2007 / () / 30 minutes

>>> Add Cart <<<


BUILDING TRADES II - PLUMBING: ROUGH-IN AND FINAL

This program looks at plumbing in its two construction phases: rough -in, or initial installation, and final. Details of water systems and drainage, waste, and venting (DWV) systems are examined, as well as tools commonly used.

DVD / 2004 / () / 19 minutes

>>> Add Cart <<<


PLUMBING: PLASTIC PIPE

The procedures used in measuring, cutting and fitting of polyvinyl chloride (PVC) and chlorinated polyvinyl chloride pipe (CPVC) are highlighted. Viewers learn how to cut the pipe using a hacksaw and miter box or a pipe cutter, how to remove the "burr" and how to chamfer and scarify. Selection and usage of primer and cement, including applicable safety precautions and temperature requirements are included, as well as helpful hints and safety precautions to follow when working with PVC or CPVC pipe.

DVD / 1994 / () / 40 minutes

>>> Add Cart <<<


PLUMBING: STEEL PIPE & MATERIAL COMBINATION

The featured plumber/instructor demonstrates proper cutting procedures (utilizing a pipe vise and either a single-wheel or a three-wheel pipe cutter), threading methods utilizing a National Pipe Thread die, burr removal, pipe fitting utilizing a threading chart, and use of Teflon program and pipe compound to ensure a watertight seal. He also addresses methods for joining any combination of plastic, copper or galvanized plumbing materials.

DVD / 1994 / () / 29 minutes

>>> Add Cart <<<


BUILDING TRADES: PLUMBING

Watch basic plumbing installation for residential and commercial construction including pipe fitting and bathroom fixtures.

DVD / 1992 / () / 14 minutes

>>> Add Cart <<<


HYDRAULIC & PNEUMATIC SYMBOLS

Fluid power; Reservoirs and receivers; Pumps and compressors; Actuators; Valves; Piping and tubing

DVD / / () / 18 minutes

>>> Add Cart <<<


INTRODUCTION TO SCHEMATICS AND SYMBOLS

Using schematics; Electrical, pneumatic, hydraulic, and piping schematics; Looking for flow; Electrical current; Fluid flow

DVD / / () / 16 minutes

>>> Add Cart <<<


PIPE DRAFTING AND DESIGN PART 10: PIPING ISOMETRICS

This twelve-part series illustrates in a concise yet comprehensive manner the procedures, techniques, and operations required to develop quality piping drawings using Manual, AutoCAD, and ProPIPE applications. The series consists of more than nine hours of instruction including lecture, animation, on-site video footage, screen captures of the software and other visual techniques and aids that greatly enhance the viewer's understanding of the subject. Part 10: Piping Isometrics What is an isometric, piping isometrics, isometric drawing symbols, isometric dimensions, isometric notes and callouts, isometric offsets, multiple angle offsets, rolling offsets.

DVD / / () / 53 minutes

>>> Add Cart <<<


PIPE DRAFTING AND DESIGN PART 2: PIPE FITTINGS

This twelve-part series illustrates in a concise yet comprehensive manner the procedures, techniques, and operations required to develop quality piping drawings using Manual, AutoCAD, and ProPIPE applications. The series consists of more than nine hours of instruction including lecture, animation, on-site video footage, screen captures of the software and other visual techniques and aids that greatly enhance the viewer's understanding of the subject.

Part 2: Pipe Fittings
Elbows, weld tee, reducers, weld cap, fitting make-up, screwed and socketweld fittings, cast iron fittings, plastic fittings


DVD / / () / 50 minutes

>>> Add Cart <<<


PIPE DRAFTING AND DESIGN PART 7: CODES AND SPECIFICATIONS / PIPING SYSTEMS

This twelve-part series illustrates in a concise yet comprehensive manner the procedures, techniques, and operations required to develop quality piping drawings using Manual, AutoCAD, and ProPIPE applications. The series consists of more than nine hours of instruction including lecture, animation, on-site video footage, screen captures of the software and other visual techniques and aids that greatly enhance the viewer's understanding of the subject.

Part 7: Codes and Specifications / Piping Systems
Codes, specifications, specification dates, plant utilities, utility stations meter runs, sewer/underground piping systems


DVD / / () / 30 minutes

>>> Add Cart <<<


PIPE DRAFTING AND DESIGN PART 8: EQUIPMENT LAYOUT / PIPING ARRANGEMENTS DRAWINGS, SECTIONS AND ELEVATIONS

This twelve-part series illustrates in a concise yet comprehensive manner the procedures, techniques, and operations required to develop quality piping drawings using Manual, AutoCAD, and ProPIPE applications. The series consists of more than nine hours of instruction including lecture, animation, on-site video footage, screen captures of the software and other visual techniques and aids that greatly enhance the viewer's understanding of the subject.

Part 8: Equipment Layout / Piping Arrangements Drawings, Sections and Elevations
Plant coordinate systems, site plans, unit plot plans, foundation location drawings, equipment drawings, sections and elevations, detail drawings.


DVD / / () / 56 minutes

>>> Add Cart <<<


PIPE DRAFTING AND DESIGN PART 9: STANDARD PIPING DETAILS

This twelve-part series illustrates in a concise yet comprehensive manner the procedures, techniques, and operations required to develop quality piping drawings using Manual, AutoCAD, and ProPIPE applications. The series consists of more than nine hours of instruction including lecture, animation, on-site video footage, screen captures of the software and other visual techniques and aids that greatly enhance the viewer's understanding of the subject.

Part 9: Standard Piping Details
Pipe rack spacing, pipe flexibility, pipe anchors, pipe guides, insulation shoes, field supports.


DVD / / () / 22 minutes

>>> Add Cart <<<


PIPEFITTING TOOLS

Pipe wrenches; Vises; Cutting, reaming, threading and tapping pipe; Cutting tubing and plastic pipe; Flaring tubing; Tool care

DVD / / () / 13 minutes

>>> Add Cart <<<


PIPING AND PLUMBING DRAWINGS

Piping and plumbing materials; Kinds of joints; Drawings; Joining metal pipes

DVD / / () / 14 minutes

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: ADVANCED PIPEFITTING 1

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.

~ Introduction to Pipefitting
~ Blueprints
~ Piping Materials
~ Materials List and Field Checks
~ Determining Pipe Length
~ Fitting Measurements
~ Marking a Pipe
~ Cutting Methods

This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: ADVANCED PIPEFITTING 2

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.


~ Torch Cutting
~ Using an Automatic Cutting Torch
~ End Preparation Tool
~ Alignment
~ Checking Alignment and Tack-Welding
~ Installation and Support

This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: ADVANCED PIPEFITTING 3

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.


~ Fabricated Joints
~ Mitre Joints
~ Riser Joints
~ Centering Heads
~ Contour Markers
~ Field Marking
~ Hole Projection Markers

This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: ADVANCED PIPEFITTING 4

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.


~ Introduction to Plastic Pipe and Cutting
~ End Preparation
~ End Cleaning
~ Joining
~ Plastic Welding
~ Fiberglass Reinforced Plastic
~ Pipe-Cutting and End Preparation
~ Making a Butt and Wrap Joint
~ Program Review

This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: PIPING 1

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.


~ Preparing for Tubing System Repair
~ Flaring Tubing
~ Bending and Cutting Tubing
~ Tubing Connections
~ Pipe Cutting
~ Threading Pipe
~ Pipe Assembly
~ Union Replacement

This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: PIPING 2

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.


~ General Maintenance and Insulation Removal
~ Elbow Removal
~ Elbow Installation
~ Selecting and Installing Insulation on an Elbow
~ Insulating a Flange and Applying Cloth
~ Plastic-Lined Piping This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: PIPING 3

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.


~ Inverted Bucket Trap Disassembly and Reassembly
~ Float-and-Bellows Trap Disassembly and Reassembly
~ Impulse Steam Trap (Piston-Type)
~ Impulse Steam Trap (Disc Type)
~ The Duplex Strainer
~ The Edge-Type Strainer This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING AND VALVE MAINTENANCE: PIPING 4

This comprehensive training program train students to install tubing and piping systems. In addition, it shows how to disassemble, clean, inspect, align, and reassemble a variety of piping and valves.


~ Cleaning Steam Condenser Tubes
~ Inspecting and Plugging Steam Condenser Tubes
~ Cutting a Tube for Removal
~ Collapsing a Tube for Removal
~ Replacing a Tube
~ Gauge Glass Replacement

This program is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities.


DVD / / () /

>>> Add Cart <<<


PIPING DIAGRAMS

Piping systems; Valves; Identifying symbols; Reading a piping schematic

DVD / / () / 12 minutes

>>> Add Cart <<<


PIPING SYMBOLS

Piping systems; Kinds of diagrams; Projections; Joints; Fittings; Symbols

DVD / / () / 15 minutes

>>> Add Cart <<<


PLUMBING TOOLS

Plumbing systems and codes; Joining pipe; Tube bending; Cutting and Assembling pipe; Plungers; Augers; Sewer tapes; Special wrenches

DVD / / () / 12 minutes

>>> Add Cart <<<

***Price on web-site may not be current and is subject to modification by quotation***



Email :
inquiry@learningemall.com

Websites :
http://www.learningemall.com [ English ]
http://www.learningemall.com.hk [ Chinese ]