*** Notice: For the protection of property rights, this catalog is available for online browsing only. Please drop us a line if you would like to receive a copiable version of this catalog. Thank You!

Content

Automotive Engines

Automotive Engines


BRAKING SYSTEMS ASE CERTIFICATION: BRAKE FUNDAMENTALS, ABS, AND FLARING

The laws of physics are central to brake technology, but you've got to put theory into practice when servicing a braking system. This video helps automotive students and trainees build a solid knowledge base in brake diagnosis and repair, from the wonders of ABS technology's three modes of operation to the nitty-gritty of flaring a brake line. Illustrating the basic roles of the master cylinder and the brake booster, the video looks at antilock systems, traction control, and the basics of inputs and outputs. Scan tool testing is also illustrated. Then, viewers learn the proper way to bend, cut, flare, and install a brake line, including both double flare and ISO or bubble flare techniques, as well as how to troubleshoot brake hose problems.

Item no.: GN02454903
Format: DVD
Audience:
Duration: 33 minutes
Copyright: 2012
StdBkNo.: 9781621022626
Price: USD 100.00

[Go top]

Add to cart


BRAKING SYSTEMS ASE CERTIFICATION: DISC AND DRUM BRAKES

Although a car technician needs to become familiar with both disc and drum brakes, each brake type has its own service-related quirks and challenges. This video features both disc and drum instruction for automotive students and service trainees. The disc brake section shows viewers different types of disc pads, rotors, and calipers; how to cut rotors using either a standard or on-car brake lathe; how to visually inspect the lines; how to disassemble the front disc and remove the rotor; and how to reassemble in a professional manner. The drum brake section covers drum shoes, springs, hold-downs, wheel cylinders, and other parts, with insight on cutting drums, disassembly, and reassembly. Staying alert for problems during a test-drive is also emphasized.

Item no.: NU00274904
Format: DVD
Audience:
Duration: 22 minutes
Copyright: 2012
StdBkNo.: 9781621022640
Price: USD 100.00

[Go top]

Add to cart


BRAKING SYSTEMS ASE CERTIFICATION: MASTER CYLINDERS, VALVES AND BLEEDING, AND POWER ASSIST

The ins and outs of brake system maintenance require skilled hands, a sharp eye, and a focused mind. This video serves as a guide to performing work on master cylinders, valves, and power assist components. Dissecting the master cylinder in order to look at its hydraulic components, compensating port, vent port, step bore cylinder, and other parts, the video also examines metering valves, combination valves, proportion valves, and their functions, while discussing pedal force, mechanical advantage, hydraulic advantage, vacuum suspended boosters, atmospheric suspended boosters, tandem boosters, single diaphragm boosters, check valves, and more. All four modes of bleeding are covered.

Item no.: WG02304905
Format: DVD
Audience:
Duration: 29 minutes
Copyright: 2012
StdBkNo.: 9781621022633
Price: USD 100.00

[Go top]

Add to cart


ENGINE PERFORMANCE ASE CERTIFICATION: COMPUTER SYSTEMS, COMPUTER SYSTEM SENSORS

To understand whether or not a vehicle is functioning properly and determine its potential problems, a service provider now has to understand computers. This video offers guidance in the complex workings of a car's nerve center and the sensors that bring information, from mass air flow to engine coolant temperature, into an automotive computer system. Viewers can sharpen their skills and knowledge in interpreting real-time scan tool readings for cars that often boast over 50 microprocessors. Examples of modules that technicians frequently deal with are shown as the video discusses OBD II procedures and a variety of sensors, such as those for throttle position, heated oxygen, manifold absolute pressure, intake air temperature, and more.

Item no.: VM00274925
Format: DVD
Audience:
Duration: 25 minutes
Copyright: 2012
StdBkNo.: 9781621022602
Price: USD 100.00

[Go top]

Add to cart


ENGINE PERFORMANCE ASE CERTIFICATION: ENGINE DIAGNOSIS, INTAKE AND EXHAUST, AND EMISSIONS

A great auto technician isn't just a "gear head." He or she needs keen analytical thinking skills to diagnose engine problems. This video guides car techs at all instructional levels in strategic engine diagnosis and the components of a car's intake system, exhaust system, and emissions controls. Viewers are shown testing procedures for power balance, compression, cylinder leakage, oil pressure, and other engine checks; a clear explanation of volumetric efficiency; the mechanics of turbo-chargers and super-chargers; how to interpret the results of a five-gas analysis in real time; how to check the EGR valve in an EVAP system; and much more.

Item no.: BG02304926
Format: DVD
Audience:
Duration: 34 minutes
Copyright: 2012
StdBkNo.: 9781621022589
Price: USD 100.00

[Go top]

Add to cart


ENGINE PERFORMANCE ASE CERTIFICATION: IGNITION DISTRIBUTORS, DISTRIBUTORLESS IGNITION SYSTEMS, AND FUEL SYSTEMS

A car's ignition gives it the spark of life-but, as any good technician knows, figuring out how ignition and fuel systems really work isn't that simple. This video sheds light on the daunting maintenance challenges found in ignition distributors, distributorless ignition systems, and fuel systems. Viewers learn about diagnosing problems with several components-including distributors, distributor caps, distributor rotors, spark plugs, and spark plug wires-and how to build an ignition system. The next section covers the computers, triggering devices, coil packs, modules, and other elements of a distributorless ignition system, while the subsequent chapter looks at fuel pumps, fuel injectors, fuel filters, fuel pressure tests, injector testing, and more.

Item no.: AM02454927
Format: DVD
Audience:
Duration: 32 minutes
Copyright: 2012
StdBkNo.: 9781621022596
Price: USD 100.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: CYLINDER HEAD SERVICE

Using a detailed, step -by -step approach, this program takes viewers through the intricate process of engine cylinder head service. Students will gain a thorough understanding of head disassembly, head cleaning and inspection, valve grinding, seat grinding, three -angle valve work, and head reassembly. Computer graphics focus on key concepts, while close -ups of actual working parts illustrate state -of -the -art methods for measuring, calibration, grinding, chamfering, cleaning, and inspection. The program includes information on safety precautions for the removal of valves, springs, guides, and other cylinder head parts, as well as how to lubricate them prior to reassembly.

Note: Not available in Australia/New Zealand.

Item no.: PD02452109
Format: DVD
Audience:
Duration: 25 minutes
Copyright: 2008
StdBkNo.: 9781421395234
Price: USD 90.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: ENGINE BOTTOM END CONSTRUCTION

Guiding students through a major component of automotive power, this video summarizes the design and construction of engine bottom end or short block assemblies. It explains how bottom end parts are made and illustrates exactly what they do inside an engine, while comparing and contrasting various part designs. Configurations for the cylinder block, crankshaft, connecting rods, bearings, and pistons - including detailed explanations of part movement and functions - are explained with the help of crystal -clear narration and easy -to -understand graphics and animation. After viewing the video, automotive students will be better equipped to understand engine operation and to analyze part failure when servicing an engine.

Note: Not available in the United Kingdom and Ireland.

Item no.: WW00270877
Format: DVD
Audience:
Duration: 22 minutes
Copyright: 2008
StdBkNo.: 9781421398945
Price: USD 90.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: ENGINE FRONT-END CONSTRUCTION

With easy -to -understand diagrams, animation, and live -action close -ups, this video guides students through the workings of front -end engine components. Viewers will receive an overview of basic front -end parts, including an outline of the three types of cam drives, and in -depth sections on the construction of timing gears, timing chains, timing belts, harmonic balancers, and front covers. Another section features variable valve timing and lift. The program explains important concepts such as chain slap, harmonic vibration, external vs. internal balance, helical gear teeth, the relationship between camshaft phasing and cam timing, and the importance of not over -tightening front cover bolts.

Note: Not available in Australia/New Zealand.

Item no.: FC02300878
Format: DVD
Audience:
Duration: 23 minutes
Copyright: 2008
StdBkNo.: 9781604672725
Price: USD 90.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: ENGINE FUNDAMENTALS

Future car technicians need a rock -solid understanding of basic engine parts and functions. Using live action and computer animation, this video illustrates the operating principles of a four -stroke cycle piston engine. After an overview of engine fundamentals, the program provides valuable know -how on the following topics: Engine Block (cylinder block, cylinder, cylinder head, oil pan, crank case, crankshaft, and main caps); Piston (piston motion, compression rings, oil ring, and piston pin); Connecting Rod (wrist pin and rod bearing); Crankshaft (main journal, rod journal, TDC, and DBC); Cylinder Head (attachment to top of block, port, valve, intake manifold, exhaust manifold, valve guide, valve spring, intake valve, exhaust valve, head gasket, and valve cover); Camshaft (cam follower, cam in head or cam in block, cam journal, bearings, and lobe); and the four -stroke cycle (intake, compression, power, and exhaust stroke).

Note: Not available in the United Kingdom and Ireland.

Item no.: WV00272110
Format: DVD
Audience:
Duration: 17 minutes
Copyright: 2008
StdBkNo.:
Price: USD 90.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: ENGINE REASSEMBLY

Filled with helpful graphics and close -ups, this video provides a detailed look at professional car engine reassembly. Viewers will learn the ins and outs of engine block and head reassembly and the installation of the cylinder head, timing mechanism, cover, oil pan, oil pump, and intake manifold. Key points about the head bolts, head gasket, camshaft, crank sprocket, crankshaft, cam cover, lifters, push rods, rocker arms, pan bolts, valve cover gasket, valve cover, and other parts and components are emphasized. Throughout the program, students receive reminders about correct lubrication and bolt tightening procedures.

Note: Not available in Australia/New Zealand.

Item no.: NC00270095
Format: DVD
Audience:
Duration: 24 minutes
Copyright: 2008
StdBkNo.: 9781608250110
Price: USD 90.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: ENGINE TEARDOWN, CLEANING, AND INSPECTION

Get students fired up for intensive engine service work! This program demonstrates the most important tasks involved in disassembling, inspecting, cleaning, organizing, and measuring engine parts. All major stages of engine tear -down and reassembly are shown, including front -end disassembly, cylinder head removal, piston and rod removal, crankshaft removal, part cleaning, and part inspection. Viewers will learn how to hoist and suspend or mount an engine, remove major components, measure part wear, check for cracks and damage, and how to determine what parts should be ordered for an engine rebuild. Safety procedures are also reinforced in this program.

Note: Not available in Australia/New Zealand.

Item no.: VR02452423
Format: DVD
Audience:
Duration: 32 minutes
Copyright: 2008
StdBkNo.: 9781421398365
Price: USD 90.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: SHORT BLOCK SERVICE

Preparing students to perform a complete overhaul, this program shows how to properly install all components into the cylinder block. The block preparation segment explains checking main bore alignment, checking for deck warps, determining piston clearance, choosing the proper cylinder hone, installing freeze plugs, removing and installing cam bearings, and more. Crank installation steps include fitting main bearings into the block, using plastiguage, tightening cap bolts, and measuring end play. The piston and rod service section covers inserting piston rings, gauging and adjusting ring gap, checking ring groove depth, installing oil rings, fitting rod bearings into rods, lowering rods and pistons into the block, and checking ring torque. Graphics and close -up footage reveal all vital procedures.

Item no.: HS00272424
Format: DVD
Audience:
Duration: 24 minutes
Copyright: 2008
StdBkNo.: 9781604676747
Price: USD 90.00

[Go top]

Add to cart


AUTOMOTIVE ENGINES: ENGINE TOP-END CONSTRUCTION

Illustrating cylinder head, valve, and valve train construction, this video is the ideal visual aid for any hands -on course in automotive engine technology. In the cylinder head construction section, viewers will learn the configuration of the cylinder head, head gasket, valve cover, camshaft, cylinder head ports, combustion chambers, and other components. The valve construction section shows proper valve sealing, spring tension, and valve parts - keepers, retainers, spring, seal, and more. The valve train construction section explains a common overhead camshaft design, showing the action of the cam, lifter, pushrod, rocker arm, valves, and other essential parts. The program is filled with animated diagrams supporting detailed live -action footage.

Note: Not available in Australia/New Zealand.

Item no.: BL02450879
Format: DVD
Audience:
Duration: 18 minutes
Copyright: 1993
StdBkNo.: 9781604674729
Price: USD 90.00

[Go top]

Add to cart


HYBRID AUTO REPAIR II: BATTERY AND SAFETY

Filled with high -voltage cables and an HV battery, a hybrid vehicle requires an extremely high level of professional awareness and skill. This video guides viewers through all the steps necessary to perform work on a hybrid's batteries and electrical system. From powering down the vehicle to monitoring and charging the AGM and standard batteries, the program provides a thorough introduction to Ford, Toyota, and Honda components. Information is also provided on testing and maintaining heavy -duty insulated gloves - essential tools for all hybrid electrical work.

Item no.: DV29110054
Format: DVD
Audience:
Duration: 21 minutes
Copyright: 2008
StdBkNo.: 9781421390031
Price: USD 100.00

[Go top]

Add to cart


TOOLS OF THE TRADE: INSIDE THE AUTOMOTIVE TECHNICIAN'S TOOLBOX

Focusing on both conventional and hybrid vehicles, this program examines the systems that make them run and the tools that keep them running. After an introduction to the power train and the fuel, electrical, cooling, exhaust, steering, suspension, and brake systems, the program moves on to the auto tech's personal hand tools and shared shop tools. All manner of wrenches, pliers, screwdrivers, and hammers are discussed, along with high -tech diagnostic instruments and specialized equipment for repairing or replacing automotive system components. Education and training opportunities are touched upon, and safety practices are emphasized throughout.

Item no.: HK02302358
Format: DVD
Audience: High School, Vocational/Technical School, Adult Education
Duration: 23 minutes
Copyright: 2008
StdBkNo.: 9781421389684
Price: USD 100.00

[Go top]

Add to cart


AUTOMOTIVE FUNDAMENTALS: FUNDAMENTALS OF ENGINE PERFORMANCE

This CD -ROM introduces the basic concept of engine performance. By covering the purpose, function, and operation of the primary automotive systems involved in engine performance -ignition, fuel, exhaust, and emissions - this program explains how the performance of an automobile can be optimized while the emissions produced are minimized. On -board diagnostics II (OBD II), which monitors vehicle conditions associated with excessive emissions, is also introduced.

Item no.: ZN00270157
Format: CD-ROM (Win)
Audience:
Duration:
Copyright: 2004
StdBkNo.: 9780736570619
Price: USD 100.00

[Go top]

Add to cart


MOTORS & DRIVES: MOTOR CONTROLS & DRIVE TYPES

This video explains how motor controls safeguard equipment from damage and contribute to efficient operation and production.

Content
  • Protection
  • Starting
  • Speed Control
  • Stopping

    Motor protection covers the disconnection types, overcurrent and overload provisions, and other protection devices.

    Motor starting is a vital consideration, as the starter must supply the motor with sufficient current to bring it up to speed under the worst-case voltage and load conditions. Six types of reduced voltage starters are described.

    Under speed control, you will learn about five external drives along withmulti-speed and adjustable-speed motors as well as controls.

    The section on drive types provides a complete look at how drives impact the operation of equipment.

    You’ll find detailed explanations of how adjustable and variable speed drives operate, and separate sections on:
  • Mechanical Drives
  • Speed-Flow Reduction Drives
  • Multi-Speed Motors
  • Adjustable Speed Drives
  • Direct Current Drives

    Four methods other than allowing a motor to coast to a stop are also discussed.

    System Requirements Windows:
  • Windows 95 or higher
  • Pentium 90 or higher
  • 16 MB RAM or more
  • 4X CD-ROM or faster
  • Thousands of colors
  • MPC Sound Card

    Macintosh
  • MacOS 7.1 or higher
  • PowerMac 7100 or higher
  • 16 MB RAM or more
  • 4X CD-ROM or faster
  • Thousands of colors

    Item no.: RM29110133
    Format: CD-ROM (Win, Single User, Single PC)
    Audience:
    Duration:
    Copyright: 1999
    StdBkNo.:
    Price: USD 99.95

    [Go top]

    Add to cart


    MOTORS & DRIVES: FUNDAMENTALS & SELECTION OF MOTORS

    Motor to turn and offers guidelines for specifying the appropriate motor for a given application.

    Fundamentals covers general information concerning the broad range of motors found in all segments of the economy. It discusses the principals of how these machines operate and the magnetic forces involved.

    Content
  • Characteristics of Motors
  • Classifications of Motors
  • Principles of Operation
  • Parts and Components
  • Nameplate Information

    The course details four factors in motor replacement:
  • Mechanical components of the driven load
  • Physical and environmental conditions
  • Economic considerations
  • Efficiency

    Key Concepts:
  • Torque
  • Magnetism
  • Three-phase operation

    The four design classifications of induction motors are similarly defined along with their typical applications. Speed characteristics, starting, running, and stopping functions are also covered.

    System Requirements
    Windows:
  • Windows 95 or higher
  • Pentium 90 or higher
  • 16 MB RAM or more
  • 4X CD-ROM or faster
  • Thousands of colors
  • MPC Sound Card

    Macintosh:
  • MacOS 7.1 or higher
  • PowerMac 7100 or higher
  • 16 MB RAM or more
  • 4X CD-ROM or faster
  • Thousands of colors

    Item no.: HZ29110148
    Format: CD-ROM (Win, Single User, Single PC)
    Audience:
    Duration: 1999
    Copyright:
    StdBkNo.:
    Price: USD 99.95

    [Go top]

    Add to cart


    MOTORS & DRIVES: MAINTAINING & TROUBLESHOOTING MOTORS

    This video provides a step-by-step model with examples of how to conduct a thorough economic and operational analysis before replacing any motors.

    Content:
  • Economic Comparisons
  • Maintenance
  • Troubleshooting

    The first section on economic comparisons examines the economics of motor replacement.

    The section on maintenance offers a complete review of proper maintenance practices for motors. Beginning with safety and moving toward preventative maintenance, this section provides information on:
  • Cleaning Motors
  • Lubrication and Bearings
  • Noise and Vibration
  • Insulation and Windings
  • Brush and Commutator Components

    The section on troubleshooting provides an indispensable reference guide on dealing with malfunctioning motors and drives. The physical and electrical sources of motor failure are covered, as well as the step-by-step instructions for troubleshooting specific problems.

    System Requirement
    Windows:
  • Windows 95 or higher
  • Pentium 90 or higher
  • 16 MB RAM or more
  • 4X CD-ROM or faster
  • Thousands of colors
  • MPC Sound Card

    Macintosh:
  • MacOS 7.1 or higher
  • PowerMac 7100 or higher
  • 16 MB RAM or more
  • 4X CD-ROM or faster
  • Thousands of colors

    Item no.: HK29110149
    Format: CD-ROM (Win,Single User, Single PC)
    Audience:
    Duration: 1999
    Copyright:
    StdBkNo.:
    Price: USD 99.95

    [Go top]

    Add to cart


    AUTOMOTIVE DESIGN FOR QUALITY AND QUALITY ASSURANCE: VIDEO FACTORY TOUR IN THE BMW MINI (UK) MANUFACTURING LTD., OXFORD, ENGLAND PLANT



    Item no.: TU00340142
    Format: DVD
    Audience:
    Duration:
    Copyright:
    StdBkNo.:
    Price: USD 140.00

    [Go top]

    Add to cart


    AUTOMOTIVE ENGINE MARRIAGE ASSEMBLY AND TEAMWORK : VIDEO FACTORY TOUR IN THE BMW MINI (UK) MANUFACTURING LTD., OXFORD, ENGLAND PLANT:



    Item no.: KN00340143
    Format: DVD
    Audience:
    Duration:
    Copyright:
    StdBkNo.:
    Price: USD 140.00

    [Go top]

    Add to cart


    CROSSOVER CONCEPT, HYBRID AND SALOON CAR CUSTOMER-FOCUSED DESIGN AND PRODUCT LIFECYCLE MANAGEMENT METHODS: TOYOTA AND OTHER EXAMPLES



    Item no.: ER00340144
    Format: DVD
    Audience:
    Duration:
    Copyright:
    StdBkNo.:
    Price: USD 140.00

    [Go top]

    Add to cart


    INTRODUCTION TO ALTERNATIVE ENERGY SOURCES, AN: HYBRID AND FUEL CELL VEHICLES



    Item no.: WH00340145
    Format: DVD
    Audience:
    Duration:
    Copyright:
    StdBkNo.:
    Price: USD 200.00

    [Go top]

    Add to cart


    INTRODUCTION TO GREEN MOBILITY & TEST DRIVES, AN (TOYOTA PRIUS, HONDA INSIGHT, BMW, GM FUEL CELL SUV CONCEPT, VW AND FORD FUSION HYBRID)



    Item no.: PN00340146
    Format: 4 DVDs
    Audience:
    Duration:
    Copyright:
    StdBkNo.:
    Price: USD 300.00

    [Go top]

    Add to cart

    ***Price on web-site may not be current and is subject to modification by quotation***


    Email :
    inquiry@learningemall.com

    Websites :
    http://www.learningemall.com [ English ]
    http://www.learningemall.com.hk [ Chinese ]